New guy from AZ

[AZ_guy]

Hey guys just wanted to say hey. Im new to CNC plasma cutting, I bought a used table and have been messing with getting it all dialed in so i'm sure ill have some questions. Looks like a good community on here, look forward to talking with everyone.

[robertspark]

welcome, post away

highly recommended a read of the tech tips thread as it has a wealth of info plus the builds thread

https://www.plasmaspider.com/viewforum.php?f=89

there is so much information on here sometimes search is your best friend to find the nugget / needle in the haystack

[AZ_guy]

thanks ill rear through that and definitely try and search for my questions before i just start posting up lists of random stuff.

[robertspark]

sorry I was not being derogatory, simply if you are new to plasma / CNC + plasma the tech tips are where to start.

although done under the linuxcnc banner, this is really a universal guide recently done

http://linuxcnc.org/docs/devel/html/pla ... rimer.html

[Old Iron]

Welcome to the site

[AZ_guy]

sorry I was not being derogatory, simply if you are new to plasma / CNC + plasma the tech tips are where to start.

although done under the linuxcnc banner, this is really a universal guide recently done

http://linuxcnc.org/docs/devel/html/pla ... rimer.html

i didnt take it as a derogatory thing at all, just saw it as a friendly pointer on how to find info the easiest. Thanks though ill check that out.