No Live View
-
LuckyWeasel
- 1/2 Star Member
- Posts: 8
- Joined: Tue Dec 11, 2018 6:35 am
No Live View
Artwork imports and looks like it would cut fine with Mach 3 and older sheetcam version. Try the same thing with the files in CandCNC and everything looks fine until I try to pull it up to cut it. At that point there is nothing in the Live view. Missing something simple but haven't found it yet. Thanks for any help. Doug
-
tcaudle
- 4 Star Elite Contributing Member
- Posts: 1513
- Joined: Tue Feb 28, 2012 6:47 pm
Re: No Live View
It means the Gcode is wrong for LINUXCNC. You need to use the SheetCAM POST for CommandCNC.
Post this on our Support Forum and you get faster responses and file access.
Post this on our Support Forum and you get faster responses and file access.
