new to this Forum

[Machielsbart]

Hi, I am Bart and i live in belgium
I am starting to build my plasma table.
until now i cut using a kuka robot, but i must teach every time the pattern in to the robot, then it cuts fine.
I plot the drawing on paper, and then teach the robot the path he must follow.
But i want to cut directly from a computer, DXF drawings
the only first question I want to ask, is there any software where i can draw and cut in the same program ?
I have seen a demo of the plasmacam, and that i like.
without converting to g-code, and then use mach3 etc...
makes live simple i think.

these are some other tools i have:
Kuka KR16 robot, & tig welder ESS with wire feeder, and can use the plasma torch
Exello lathe
mayford lathe
Ramo lathe
Jaspar milling
plasma cutter 40mm
Esab and Kempi welding stations
every tool to make Stainless stairs etc

[plasmanewbie]

Welcome to the site. I believe Flashcut CNC can help you with that. They have a CAD/CAM/CUT package that I have heard good things about. Best of luck with your build!