120 vs 240 in cut quality

Cut quality issues can be discussed here, most common issues have been discussed here and should help you.
Post Reply
nordicjack
1/2 Star Member
1/2 Star Member
Posts: 4
Joined: Tue Mar 26, 2019 10:09 am

120 vs 240 in cut quality

Post by nordicjack »

all things equal same cutter.. Are you going to see a difference between 120 vs 240 in cut quality.. on thin.. stuff.. obviously you would get more power on thick - but even with that are you seeing a quality difference?
Top
Brand X
3.5 Star Member
3.5 Star Member
Posts: 511
Joined: Wed Apr 23, 2014 2:48 pm

Re: 120 vs 240 in cut quality

Post by Brand X »

Good quality machines,i would say no.. Esab, Thermal dynamics, Hypertherm.. Cheaper China units the cut quality will suffer because they mostly start out behind the 8 ball anyway...
Top
Post Reply

Return to “Plasma Cut Quality Forum”