oven burner

mmentel5 · Post by **mmentel5** » Wed Jan 23, 2019 3:52 pm

has anybody used a propane forced air heater for there heat element

mmentel5 · Post by **mmentel5** » Thu Jan 24, 2019 12:02 pm

for a powder coating oven probable should of mentioned that

WyoGreen · Post by **WyoGreen** » Thu Jan 24, 2019 6:31 pm

I remember there being some discussions over on the Powder365 forum on this subject. Scroll down to the ovens section and look around in there.

https://www.powder365.com/forum/index.php

Steve

mmentel5 · Post by **mmentel5** » Fri Jan 25, 2019 7:35 pm

thank you I will take a look

Ryan · Post by **Ryan** » Wed Feb 06, 2019 7:28 pm

You can use any torpedo heater with an auto on/off thermostat.

JDR Metal Art · Post by **JDR Metal Art** » Sun Mar 10, 2019 1:37 pm

Yes they work. However you will be wasting huge amounts of heat because the forced air from the torpedo will constantly be pushing hot air out of the oven much faster than it can be absorbed by the parts. I have done several configurations with torpedo heaters and cut my fuel use by at least half by changing to propane burners that only draw the amount of air needed for good combustion.

mmentel5 · Post by **mmentel5** » Wed Mar 20, 2019 11:52 am

what type of burner are you using. where can I get one?

oven burner

oven burner

Re: oven burner

Re: oven burner

Re: oven burner

Re: oven burner

Re: oven burner

Re: oven burner