I was wondering what you all would charge for this personalized custom 24 x 24 sign with high quality automobile paint and clear coat. And also with just standard normal paint. Thanks in advance for the help.
Advice For Pricing
-
Oakleys
- 1/2 Star Member
- Posts: 1
- Joined: Thu Mar 08, 2018 1:30 am
Advice For Pricing
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
plasmanewbie
- 5 Star Elite Contributing Member
- Posts: 2746
- Joined: Thu Jul 24, 2008 11:15 am
Re: Advice For Pricing
I opened your file but CorelDraw didn't like it. This is what I saw
Maybe someone else can chime in with better success than me. Sorry.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
rdj357
- 4 Star Elite Contributing Member
- Posts: 1185
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
Re: Advice For Pricing
I'd be at $155 in 12 gauge steel with single color, one coat powder coat.
163 pierces and 540 inches of cutting there.
163 pierces and 540 inches of cutting there.
Robert Johnson
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
-
little blue choo
- 4 Star Member
- Posts: 1458
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Advice For Pricing
Never seen a SVG I couldn't open in Inkscape, until now. I just get a black blob
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
rdj357
- 4 Star Elite Contributing Member
- Posts: 1185
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
Re: Advice For Pricing
I used my vinyl software's import SVG function and then exported a DXF so I could open in Design Edge. Quite a few intersections and crossovers that are probably messing with Inkscape.
Robert Johnson
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
