Patriotic Garden Gnome
Download DXF/SVG
Download DXF/SVG
Open paths are being closed
-
RAD
- 2 Star Member
- Posts: 81
- Joined: Fri Aug 28, 2015 3:17 pm
Open paths are being closed
Opens are being closed what can be causing this?
- Attachments
-
-
-
D.I.Y 4x4 CNC Plasma Table with water tray
60 Gal. A/C + D.I.Y Aftercooler + Water/Oil seperator + Desicant air dryer
45XP (CPC with hand torch)
MiniTHC
UCCNC + Sheetcam + Inkscape / AutoCAD
60 Gal. A/C + D.I.Y Aftercooler + Water/Oil seperator + Desicant air dryer
45XP (CPC with hand torch)
MiniTHC
UCCNC + Sheetcam + Inkscape / AutoCAD
-
RAD
- 2 Star Member
- Posts: 81
- Joined: Fri Aug 28, 2015 3:17 pm
Re: Open paths are being closed
Ok found the problem: overcut should be set to 0" for open paths
D.I.Y 4x4 CNC Plasma Table with water tray
60 Gal. A/C + D.I.Y Aftercooler + Water/Oil seperator + Desicant air dryer
45XP (CPC with hand torch)
MiniTHC
UCCNC + Sheetcam + Inkscape / AutoCAD
60 Gal. A/C + D.I.Y Aftercooler + Water/Oil seperator + Desicant air dryer
45XP (CPC with hand torch)
MiniTHC
UCCNC + Sheetcam + Inkscape / AutoCAD
-
jakeg
- 1.5 Star Member
- Posts: 46
- Joined: Fri Jun 17, 2016 8:14 pm
Re: Open paths are being closed
Carefully continue to read all the options. Off set open paths and lead in on open paths is checked
-
acourtjester
- 6 Star Elite Contributing Member
- Posts: 8490
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Open paths are being closed
If I am cutting lines (open paths) I use "no offset" and no lead ins.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
