What is the name of this part?
-
GoingCustom
- 3.5 Star Member
- Posts: 577
- Joined: Wed Nov 10, 2010 2:53 pm
- Contact:
What is the name of this part?
Anyone happen to know what this part is called and/or where I can order one? It attaches to the shaft of the z-axis servo. Thank you
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Travis
one of a kind gates, fine art and CNC designs
one of a kind gates, fine art and CNC designs
-
GoingCustom
- 3.5 Star Member
- Posts: 577
- Joined: Wed Nov 10, 2010 2:53 pm
- Contact:
Re: What is the name of this part?
flexible coupling
Travis
one of a kind gates, fine art and CNC designs
one of a kind gates, fine art and CNC designs
-
sphurley
- 3 Star Member
- Posts: 445
- Joined: Sat Jul 04, 2015 10:43 pm
Re: What is the name of this part?
You will need to know both in and out shaft sizes. They may or may not be the same.
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
-
tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1713
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: What is the name of this part?
I would contact Dan he should know
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
-
AndrewMawson
- 2 Star Member
- Posts: 54
- Joined: Tue Jan 17, 2017 3:54 pm
Re: What is the name of this part?
Consider replacing it with an Oldham style coupling to avoid future breakages from wind up
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
4x4 DIY Plasma Table
Hypertherm PM45
Purelogic THC
Mach3
Sheetcam
Inkscape
Hypertherm PM45
Purelogic THC
Mach3
Sheetcam
Inkscape
-
acourtjester
- 6 Star Elite Contributing Member
- Posts: 8490
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: What is the name of this part?
there are tons of them on eBay but from china many weeks for shipping
http://www.ebay.com/itm/Brand-New-CNC-8 ... SwjDZYmq58
local supplier for similar to above would be WWW Graingers (love joy coupling) but I don't think they are metric.
http://www.ebay.com/itm/Brand-New-CNC-8 ... SwjDZYmq58
local supplier for similar to above would be WWW Graingers (love joy coupling) but I don't think they are metric.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
GoingCustom
- 3.5 Star Member
- Posts: 577
- Joined: Wed Nov 10, 2010 2:53 pm
- Contact:
Re: What is the name of this part?
Thank you. Realized that once I figured out what it was.sphurley wrote:You will need to know both in and out shaft sizes. They may or may not be the same.
Sent him an email, but haven't heard back yet. Just need to get back up and running ASAP.tnbndr wrote:I would contact Dan he should know
I hadn't seen that before! Thank you for the suggestion, I'll look into it!AndrewMawson wrote:Consider replacing it with an Oldham style coupling to avoid future breakages from wind up
Travis
one of a kind gates, fine art and CNC designs
one of a kind gates, fine art and CNC designs
-
sphurley
- 3 Star Member
- Posts: 445
- Joined: Sat Jul 04, 2015 10:43 pm
Re: What is the name of this part?
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
-
DMoneyAllstar
- 2 Star Member
- Posts: 80
- Joined: Tue Jan 17, 2017 9:11 pm
Re: What is the name of this part?
For future reference, remember to measure the height of your old coupling before you buy a new one. The Lovejoy ones (L050) are alot taller, but I was able to make it work despite. May not be as easy to accommodate on another table.
