MEGA series Star Lab machines
-
BTA Plasma
- 3.5 Star Elite Contributing Member
- Posts: 632
- Joined: Thu May 12, 2011 4:28 pm
MEGA series Star Lab machines
We are proud to announce the Mega line of Star Lab machines. This particular one is a 75.5"x289" travel machine. Enough acceleration to cut 26ga steel at book speeds but enough mass to support six inches of steel 72x288. Twin USA made large inside heavy duty cable chain carrier on both sides. 5x5 Boxed square tubing and a 55 degree angled oversized water bed. This is a massive machine.
If Matt is using this profile he is one of the OGs of Plasma. If not then a technician. We make the worlds fastest and largest CNC plasma tables up to 10x40. www.StarLabCNC.com 
Check out our Facebook page where we update frequently. https://m.facebook.com/StarLabcnc/
Check out our Facebook page where we update frequently. https://m.facebook.com/StarLabcnc/-
Unvevo
- 2 Star Member
- Posts: 88
- Joined: Wed Jun 29, 2016 4:42 pm
Re: MEGA series Star Lab machines
Wow that's huge!
-
BTA Plasma
- 3.5 Star Elite Contributing Member
- Posts: 632
- Joined: Thu May 12, 2011 4:28 pm
Re: MEGA series Star Lab machines
The machine in the picture is set up with a Hypertherm Max Pro 200 and slat spacing as tight as 2.25. The greyish-white in the water bed is powder coat primer.
If Matt is using this profile he is one of the OGs of Plasma. If not then a technician. We make the worlds fastest and largest CNC plasma tables up to 10x40. www.StarLabCNC.com Check out our Facebook page where we update frequently. https://m.facebook.com/StarLabcnc/
Check out our Facebook page where we update frequently. https://m.facebook.com/StarLabcnc/
