dxf file to TCT file help

[HEMTEC2020]

Hi

we have a steeltailor plasma with a hypertherm 105 and we cnkeep having trouble convert autocad dxf files to TCT file to cut on the plasma.
Can any one offer advice?

Thank you in advance

[Larry83301]

Your table uses TURBO CAD files, so what I would try is a FREE trial of TURBO CAD. You can use it to convert your DXF files to TCT and cut them. You can get TURBO CAD for as little as $99 that does 3D if you need 3D, or get just a 2D program for even less right from the TURBO CAD site. If you look around you can find it for even less.
https://www.turbocad.com/content/free-trials

OR just try this one
https://www.turbocad.com/turbocad-windo ... -2016.html

Hope this helps you.


Larry

[acourtjester]

I use TurboCad deluxe 20 I have found the deluxe works better then the Designers version for plasma work. IMHO
Here is deluxe 21 for $50. on amazon
https://www.amazon.com/TurboCAD-Deluxe- ... +deluxe+20

[Larry83301]

I use TurboCad deluxe 20 I have found the deluxe works better then the Designers version for plasma work. IMHO
Here is deluxe 21 for $50. on amazon
https://www.amazon.com/TurboCAD-Deluxe- ... +deluxe+20

Great! I don't use TURBO CAD but just wanted to steer him in that direction, glad someone that uses it chipped in. Like I told him, if you look around it can be found for a lower price after he uses the FREE trial to see how he likes it.


Larry

[HEMTEC2020]

Hi

Thank you for the feedback. Will go the turbo cad.