Hey guys, im fairly new to corel. I have Corel X7, when exporting to dxf (autocad 2000 version) i sometimes "lose " some splines. They appears as just dots, when you click on them in autocad (2016 version) you can see what the spline is supposed to look like but its just a single dot. I have attached a file that has 9 of these messed up splines, if someone could point me in the right direction that'd be awesome, thanks again
Splines to dots
-
jfelker81
- 2 Star Member
- Posts: 57
- Joined: Mon Nov 02, 2015 1:41 pm
- Location: Muskegon MI
Splines to dots
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Cincinnati CL-940 4000 watt Fiberoptic Laser 5' x 10' Dual Pallet
-
muzza
- 4 Star Member
- Posts: 1445
- Joined: Wed Feb 04, 2009 5:35 pm
Re: Splines to dots
I opened your dxf in X5 and everything looks fine. I can't open your X7 file as mine is an earlier version but what may be giving you grief is the Acad version not being compatible, personally I have had best success with 2008.
Murray
Murray
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
jfelker81
- 2 Star Member
- Posts: 57
- Joined: Mon Nov 02, 2015 1:41 pm
- Location: Muskegon MI
Re: Splines to dots
Tried all versions of dxf, all do the same with those 9 splines. But when i run it through my nesting software its all there, which is the important thing. If i use pedit in cad and turn them into polylines my laser really slows down on those vs the splines.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Cincinnati CL-940 4000 watt Fiberoptic Laser 5' x 10' Dual Pallet
