Problem on new computer
-
patriotplasma
- 1/2 Star Member
- Posts: 4
- Joined: Fri Apr 10, 2015 11:22 pm
- Contact:
Problem on new computer
Was wondering if anyone had an idea on why sheetcam looks different on my new computer. Ive been running sheetcam on my tables computer that runs mach3 and have had no issues, office computer windows 8 table computer windows xp.
- Attachments
-
- table computer
- IMG_0771.JPG (112.68 KiB) Viewed 751 times
- table computer
- IMG_0771.JPG (112.68 KiB) Viewed 751 times
-
- office computer
- IMG_0770.JPG (117.73 KiB) Viewed 751 times
- office computer
- IMG_0770.JPG (117.73 KiB) Viewed 751 times
-
BTA Plasma
- 3.5 Star Elite Contributing Member
- Posts: 624
- Joined: Thu May 12, 2011 4:28 pm
Re: Problem on new computer
Wrong decimal place on your kerf setting in the tool your using for that cut.
-
patriotplasma
- 1/2 Star Member
- Posts: 4
- Joined: Fri Apr 10, 2015 11:22 pm
- Contact:
Re: Problem on new computer
Thanks for the info I checked it out also I noticed that I had it set on metric so changed it over to inch and now its coming out the way it should.
