August EasyScriber Giveaway - WINNER SELECTED

[EasyScriber]

We're giving away another EasyScribe tool at the end of August so if you missed out before be sure to get entered again!

To enter simply reply to this post and let us know what brand and model of plasma table and plasma cutter you use.

For more info on this tool visit the website at https://www.theeasyscriber.com

Scribe text, designs, bend lines, drill points, and much much more quickly and quietly.

Check out the recent EasyScribe project submitted by Lee Rhodehamel in Ohio

[AAmetals]

4x8 svtc with hypertherm 45 xp

[Larry83301]

I have a home built setup with a self made cutting heads. Does 2D / 3D and laser but I would love an engraver to make it complete. 30" X 48" table.MasterCam and Mach 3 run everything and it does well.


Larry

[Nuge440]

Plasmacam DHC with a Hypertherm 1100

[rcktscientist]

Torchmate 4X4 Growth Series and Hypertherm Powermax65

[cutnweld]

5X10 homebuilt with servo system drives. Hypertherm powermax 85 plasma unit.

[kturville]

plasmacam DHC2 with hypertherm powermax 45xp

[cr500rider]

Langmuir table, Hypertherm 45 running a Duramax torch.

[big496]

STV 4400 with a powermax 65

[lostn50s]

Thanks for the opportunity !

Cutting Edge Plasma Table with 45XP.

Rob

[HankAz]

Langmuir Crossfire, Hypertherm 45XP with machine torch.

[djreiswig]

Starlab 4x8, Hypertherm PowerMax 65

[LaserZX]

Just bought a used 5x5 PlasmaCam hoping to use a Lotos 5000HDP

Still need the interface cable

[skyecyn]

Homemade table, Candcnc electronics, Hypertherm 45 plasma.

[JohnsonCo]

Squikmons maverick 4x4 with Hypertherm 85

[Jbrock]

Langmuir pro. Hypertherm 65

[Cindip]

Starlab 4x8 with a Hypertherm 65

[Jason@bc]

Home built water table with Precision Plasma gantry, Candcnc electronics, running a Hypertherm 85, 4x8 table. Thanks for the chance to win this tool.

[Kj6bab]

Langmuir Crossfire Pro table with a Thermal Dynamics Cutmaster A80 plasma cutter and a SL100SV torch.

[knight7338]

Westcott 4x4 hypertherm 85

[Jsceviour]

Cncrouterparts Pro 4896 with a Hypertherm powermax 45 (not xp) duramax torch

[hardworker]

Retro systems 6X12 Hypertherm hyspeed ht2000

[TravT07]

Langmuir Crossfire Pro
Razorweld 45

[sea1hope]

PlasmaCam DHC2 running Design Edge Plus with Hypertherm 65

[Xtreme metal]

Tracker 5x10 , Corel Draw , Hypertherm Powermax 85