Trying to Find This Font

If you are looking for help with a file conversion please post it here rather than in the file sharing forums.
Post Reply
User avatar
HARJO
1 Star Member
1 Star Member
Posts: 17
Joined: Fri Jan 06, 2017 7:25 pm
Location: Idaho

Trying to Find This Font

Post by HARJO »

Hi Everyone,

I've been lurking around here for a couple years; I've definitely learned A LOT from y'all. So thank you everyone who is a contributor here, truly.

So onto the main topic... I'm looking to see if anyone knows what this font is. I had a customer send me this pic, but I have had no luck in finding that particular font. Any help?

Thanks all!

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8183
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Trying to Find This Font

Post by acourtjester »

there are sites that you can send a JPG image of the font to and they will sell it to you. But to get a true match you will need a better view of the font. try getting a straight on shot with a white background to clean up the image first.
https://www.dafont.com/
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
User avatar
HARJO
1 Star Member
1 Star Member
Posts: 17
Joined: Fri Jan 06, 2017 7:25 pm
Location: Idaho

Re: Trying to Find This Font

Post by HARJO »

Right... which is typically what I'd do. However this isn't my work piece, the pic was supplied by the customer and they want that exact font. I've been scrolling through fonts for more hours than I care to admit.

Just hoping someone recognizes it and could point out the name. I don't mind buying it if it's licensed.
User avatar
Larry83301
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 2620
Joined: Tue Oct 27, 2009 6:36 pm
Location: Twin Falls, Idaho

Re: Trying to Find This Font

Post by Larry83301 »

I'm not sure if either of these will help but
1: Try dafont.com And see if you can find it
2: Try using this program, http://fontviewer.net/ it helps you see what you already have available (may help)
3: try one of these http://www.searchfreefonts.com/ http://fontzone.net/ http://www.azfonts.net/
http://www.fontspace.com/search/?q=Ink%20Burrna http://www.discoverfonts.com/ http://www.ffonts.net/
I hope some of this will help.


Larry
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8183
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Trying to Find This Font

Post by acourtjester »

I was only talking about the image of the font, and nothing else, as that is what you asked for.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
DadaShark11
1 Star Member
1 Star Member
Posts: 10
Joined: Sat Oct 10, 2020 6:18 pm

Re: Trying to Find This Font

Post by DadaShark11 »

adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 10138
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Trying to Find This Font

Post by adbuch »

DadaShark11 wrote: Thu Dec 10, 2020 8:52 am www.urbanfonts.com
:Like :Like :Like :Like :Like
sbest1
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 627
Joined: Fri Jan 16, 2009 10:26 pm

Re: Trying to Find This Font

Post by sbest1 »

The closest I have is called Merienda. With a bit of tweaking, it looks close. Attached is a pdf and svg of the name.
When I have a customer that is specific about a font, I ask them to provide me the name of it. Usually when they
see the frustration of trying to find the exact one, they will settle for close.

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 10138
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Trying to Find This Font

Post by adbuch »

sbest1 wrote: Tue Dec 15, 2020 1:29 pm The closest I have is called Merienda. With a bit of tweaking, it looks close. Attached is a pdf and svg of the name.
When I have a customer that is specific about a font, I ask them to provide me the name of it. Usually when they
see the frustration of trying to find the exact one, they will settle for close.
:Like :Like :Like :Like :Like
Post Reply

Return to “File Conversion Help Wanted”