oven cart

[STEEL3470]

ok my booth and oven are 95% done wiring left to do, i need to build some carts at least two but what type of wheels are there, obviously high heat ones, just wondering what type of wheels you guys have used and had good luck with.

thanks
john

[acourtjester]

I just cut steel wheel out of 1/4" plate and put a bolt through them to mount. Your not taking about speed or distance so they worked great.

[chattacuda]

Here is what I am using. http://www.amazon.com/dp/B00THJKYGK/ref ... JXLU30AAEV. I saw a build somewhere where the builder tack welded two pieces on angle iron with the 90 degree angle up in the floor of his oven as guides for these wheels to run on which I copied. I am using hi temp nickel Nver-Seez as lubricant. Just a thought

[LakeCruiser]

Here is what I am using. http://www.amazon.com/dp/B00THJKYGK/ref ... JXLU30AAEV. I saw a build somewhere where the builder tack welded two pieces on angle iron with the 90 degree angle up in the floor of his oven as guides for these wheels to run on which I copied. I am using hi temp nickel Nver-Seez as lubricant. Just a thought

Thanks for that info. I just got my 4 in for my build.

[STEEL3470]

I ended up getting the high heat wheels from eBay and they suck, just switched to metal wheels and so much better