Any advice on this piece
-
Greg7806
- 1 Star Member
- Posts: 14
- Joined: Sun Aug 30, 2015 6:27 pm
- Location: Ontario, Canada
Any advice on this piece
I drew this up and cannot figure out why when it comes around to left side at 3 it cuts off its path.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
Gogitter
- 2 Star Member
- Posts: 51
- Joined: Tue Oct 06, 2009 7:52 pm
- Location: Northern NY
Re: Any advice on this piece
Tried to open your file in CorelDrawX5...it opens to a file but there appears to be nothing there...
CandCNC Electronic
Hypertherm Powermax1000
Mach 3
Sheetcam
CorelDrawx5
LDR 4X8 table
Hypertherm Powermax1000
Mach 3
Sheetcam
CorelDrawx5
LDR 4X8 table
-
plasmapros
- 2.5 Star Member
- Posts: 135
- Joined: Tue Sep 02, 2008 4:33 pm
Re: Any advice on this piece
Opens for me in X7 and if you zoom in on the areas I have marked in red there are lines extending beyond where they should be. This could be your problem.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
