Muriatic Acid consentration

Learn and share dross removal techniques, experiences, and product knowledge here.
Post Reply
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1458
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:
Contact little blue choo

Muriatic Acid consentration

Post by little blue choo »

What concentration of muriatic acid do you use to remove dross.

Thanks
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Top
Masons Forge
2 Star Elite Contributing Member
2 Star Elite Contributing Member
Posts: 99
Joined: Fri Jul 05, 2013 11:18 pm
Location: Concord NC
Contact:
Contact Masons Forge

Re: Muriatic Acid consentration

Post by Masons Forge »

I use 1:1.5 to 1:2 acid to water. This is just an estimate. I don't measure
Top
User avatar
little blue choo
4 Star Member
4 Star Member
Posts: 1458
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:
Contact little blue choo

Re: Muriatic Acid consentration

Post by little blue choo »

What I was looking at was like 32% or something like that. So you then cut the 32% stuff 1 part acid to 1.5 part water. Is this right?

Thanks
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Top
Post Reply

Return to “Dross/Slag Removal”