They're Heeeerrrreee!
-
cstroke
- 3 Star Elite Contributing Member
- Posts: 407
- Joined: Thu May 24, 2012 7:45 pm
Re: They're Heeeerrrreee!
Not sure about diodes, but I bought a spray LBT all purpose black (Laserbond 100) that I spray on stainless and with a Co2 it leaves a nice black marking.
6’x12’ Dynatorch powermax 85
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
-
Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3362
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: They're Heeeerrrreee!
The laser may be burning some element in the mustard and staining the metal, with a fairly decent bond, but I doubt the blue laser actually etches the stainless steel itself. I will try it though ...acourtjester wrote: ↑Thu Jun 27, 2024 10:41 am Joe you can etch stainless steel with a blue laser, you coat it with mustard and laser away.
DSCN5107.JPG
Pardon me ... Do you have any Grey Poupon?"
Joe
Bitten by the laser bug.
Now my PlasmaCAM tables fight for attention!
X-TOOL D1 PRO (x 4 ?
) w/20W, 40W and 2W-IR heads + accs
X-TOOL F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2)
LaserPecker 1 PRO, LP-2, LP-4 and accs
50 Watt GALVO fiber laser
TYVOK Spider S1 60W Diode Laser 49" x 96"
CreatBot D600 PRO 3D printer
Stratasys Fortus 400mc 3D Printer
Obscene Levels of Debt
No help.
FREE DesignEdge Training Via ZOOM!
Now my PlasmaCAM tables fight for attention!
X-TOOL D1 PRO (x 4 ?
) w/20W, 40W and 2W-IR heads + accsX-TOOL F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2)
LaserPecker 1 PRO, LP-2, LP-4 and accs
50 Watt GALVO fiber laser
TYVOK Spider S1 60W Diode Laser 49" x 96"
CreatBot D600 PRO 3D printer
Stratasys Fortus 400mc 3D Printer
Obscene Levels of Debt
No help.
FREE DesignEdge Training Via ZOOM!
-
acourtjester
- 6 Star Elite Contributing Member
- Posts: 8041
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: They're Heeeerrrreee!
I did that with my first laser an Ortur either 5 or 10 Watts, I have not tried it with the newer 70 Watt I bought.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
