WIN WIN WIN! EasyScriber September Giveaway!

[Layinfram]

ARCLIGHT ARCPRO ULTRA 5x10with hypertherm powermax 45 xp

[knight7338]

westcott 4x4 hypertherm 85

[cutnweld]

Home brew 5x10. Power max 85

[Tredonk]

Langmuir XR table and Hypertherm XP45 with Duramax machine torch.

[Wardo97531]

Stv cnc SparX 4800 table, PowerPlasma 82I

[Tredonk]

Langmuir XR table and Hypertherm XP45 with Duramax machine torch.

[Bridgebldr]

Home built table with a Powermax 65 and machine torch.

[Polargtx]

Plasmacam DHC2
Everlast 82i

[LiquidEdge]

I have the Arclight pro with Hypertherm powermax 85, I use sheetcam.

[Splinters&Sparx]

Premier Plasma Table 4x8 , Hypertherm Powermax 45 XP machine torch, Thank you

[Willdamnit]

Ok I'll bite, langmuir cross fire pro and prime weld cut 60 with machine torch, Thank you ...and boxers if it helps

[AdamE]

Langmuir Crossfire Pro. PrimeWeld Cut60

Thanks!

[ShaneP]

Langmuir Crossfire Pro table and Hypertherm 45XP with Duramax machine torch.

[Jb_engineering]

Xtreme plasma 4x4 table, rtech 45amp

[big496]

STV CNC 4400 with a powermax 65

[Promod Mullet]

Detrick design 4x4 plasma table and a hypertherm power max 65

[EasyScriber]

OK September has come and gone and it's time to select a winner for this giveaway

From a random draw the selected winner is....................Willdamnit

Congratulations Willdamnit we have the perfect scribe for your PrimeWeld Cut 60.

Thanks to everyone who entered and we will be sure to have another giveaway very soon

[Willdamnit]

[djreiswig]

Congratulations.

[AREA]

Lucky guy, congratulations

[Layinfram]

Congratulations

[Splinters&Sparx]

Shucks that's two months in a row the winner is the post below mine, anyways CONGRATS Willdamnit!!

[Dirtmotor]

Congratulation Willdamnit ! Sure wished I could win one ...

[Willdamnit]

Here design I made with the easysciber I won. I used Inkscape with axidraw extension and sheetcam plate marker. Thanks again

[djreiswig]

That's cool.