20 Can spray bomb wall mount

[Searchman]

Now I may get organized. Thanks for the two shares

[DezertBlingMoto]

very nice upgrade , just cut my first . Will definitely be doing the 2 break one .

[stuk4x4]

Thanks to Allan101 and Old Iron for the file.
Walt

[Hootville]

Now this is going to come in handy! Thanks Gents.

[tothwelding]

what a great idea. its the small things like this that some of us don't think about that really help.

[rons]

Very nice but what we all need is a automatic can shaker

[abmetal]

Harbor Freight shaker works great!

Allen

[Enfib]

fantastic idea sir, thanks for sharing...been looking for a good idea for bombs 6 months now..finally one that makes sense..thumbs up

[gloria]

looks awsome thanks

[acourtjester]

I cut the 20 can holder after I modified the file slightly. I wanted to hang it on the inside of my shop side door, and the leftover sheet of 14 Ga was only big enough for 34". So I scaled it in Inkscape all combined and this reduced the can opening down to 2-13/16" when cut with no offset. When I cut it the center line group cut from start to end and back to start without lifting the torch so I corrected ths in this attached file.

20CanHolder.svg

DSCN3290.JPG

[bhf]

The expanded paint can holder wasn't quite 16" on center, so I moved the outside mounting holes in. This should be 16" on center now.

Untitled.png

[adbuch]

I wasn't quite sure what you meant, but now I see - you moved the holes for mounting to wall studs that are located 16" OC.
Thanks,
David

16 inch OC.jpg

[adbuch]

I cut the 20 can holder after I modified the file slightly. I wanted to hang it on the inside of my shop side door, and the leftover sheet of 14 Ga was only big enough for 34". So I scaled it in Inkscape all combined and this reduced the can opening down to 2-13/16" when cut with no offset. When I cut it the center line group cut from start to end and back to start without lifting the torch so I corrected ths in this attached file.
20CanHolder.svg
DSCN3290.JPG

Unfortunately for me, I would need very many of these to hold all my spray cans - and then of course wall space to mount them. But a great looking holder and I really like the color.
David

[Double S Farms]

Very nice - thanks for the fine file!

[Curtsinger]

Thank you. Exactly what I need.

[Willdamnit]

Thanks for the file I mounted it vertically worked better for my use..

20240330_134102.jpg

[cuttinparts]

Nice! Looks awesome and great use of space.

[Seeya47a]

Awesome - I'll be cutting these soon to help clear up some bench space.