OK, I have a PM 85 and am having problems. I thought an oil separator was installed with the regulator and water filters. Seems not true.
Problem is I have oil in the switches and lines of the plasma cutter.
Can anyone suggest how to get the lines cleaned out?
Any help is greatly appreciated.
Thanks
Gary
Bow Hunter Antler Design
Download Design
Download Design
PM 85 Oil in lines
-
grindergary
- 3.5 Star Elite Contributing Member
- Posts: 620
- Joined: Sat Aug 25, 2012 8:08 pm
- Location: Edmonton, Alberta Canada
- Contact:
PM 85 Oil in lines
4x8 Home made with Precision Plasma LLC. Gantry
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
-
jimcolt
- 5 Star Elite Contributing Member
- Posts: 3087
- Joined: Mon Jul 20, 2009 11:18 pm
- Location: North Carolina
Re: PM 85 Oil in lines
If it is that severe....you need to check your air system. Some facilities use line oilers for air tools.....you will need to find an air drop that does not have an oiler. It is unlikely that much oil would be in the lines normally.
Hypertherm tech service is your best bet for advice on cleaning the oil out of the system.
Jim Colt Hypertherm
Hypertherm tech service is your best bet for advice on cleaning the oil out of the system.
Jim Colt Hypertherm
