taps 3X
-
bloomingroventer1716
- 1/2 Star Member
- Posts: 3
- Joined: Sat Jun 09, 2012 2:22 pm
taps 3X
When trying to cut, my machine moves to the correct place but then taps the metal 3X and then goes to the correct height. What am I doing wrong? Thanx, Kare
-
JJsCustomDesigns
- 3.5 Star Member
- Posts: 567
- Joined: Thu Jul 07, 2011 12:29 pm
- Location: Nebraska
Re: taps 3X
Might help to let everyone know what machine your using along with what programs and equipment your using. There are alot of knowledgeable people here that can help you figure this out.
"There are bigger things planned for you in your life, be patient"
Im on the prowl for a good used Hypertherm Plasma with hand torch.
PM me with details
Thanks
Im on the prowl for a good used Hypertherm Plasma with hand torch.
PM me with details
Thanks
-
bloomingroventer1716
- 1/2 Star Member
- Posts: 3
- Joined: Sat Jun 09, 2012 2:22 pm
Re: taps 3X
I have a Hypertherm 600. Plasmacan DHC. I would appreciate it if you could shed some light on this. My computer is running Windows XP. Thanx. Karen
