This ones driving me nuts

[Sampson Jones]

I removed a dogs face from the lower portion of this cross , simply connected the two pieces with the straight line connector . The whole cross completely was together again , grouped the objects , hit export with the dxf tool . When its imported in sheetcam its missing the connector lines ,wtf ?

[Sampson Jones]

O k I have confirmed the problem is with the dxf export tool from Lenord Designs . Anybody else had this problem ?

[SignTorch Vector Art]

don't use connector lines to connect or close curves, they are (mainly) for flow charting, they connect two objects and stay connected when either object is moved

connectorlines.png (69.6 KiB) Viewed 867 times

connectorlines.png (69.6 KiB) Viewed 867 times

in this case, simplest solution is to ungroup, erase the connectors, turn snap-to-objects on, and use the freehand-tool to draw line segments where needed

[Sampson Jones]

Thanks , I the dxf tool must be working correctly then ,my bad .