Bridgeport Mill Tilting table done
-
TJS
- 4 Star Member
- Posts: 829
- Joined: Wed Nov 26, 2014 1:22 pm
- Location: Fairfield, CT.
- Contact:
Bridgeport Mill Tilting table done
I always wanted a tilting table to do some simple cylinder head work. No guide work or resurfacing, just screw in studs and guide plates as well as machine for PC seals. I got the idea from Ryanbrownracing dot Com. I used my table to create the uprights and thick washers. I have yet to bolt a head up to the plate and indicate it but I am sure I will be more exact than a piece of wood and a drill press to perform screw in rocker studs operation you see on YT.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 11430
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Bridgeport Mill Tilting table done
TJ - very nicely done! Nice machining and welding as well as the plasma cut parts.
David
David
-
TJS
- 4 Star Member
- Posts: 829
- Joined: Wed Nov 26, 2014 1:22 pm
- Location: Fairfield, CT.
- Contact:
Re: Bridgeport Mill Tilting table done
Thanks David. Had to turn up the heat on the Miller Dynasty to get some good tig welds.adbuch wrote: Fri Jun 06, 2025 10:07 am TJ - very nicely done! Nice machining and welding as well as the plasma cut parts.
David
