Knobs/hand wheels

[acourtjester]

Here are s few knobs I cut to be used on projects for hand wheels, in place of a bolt that I would need to use a wrench on. I have also 3-D printed some which would simple glued on the bolts too.

DSCN0397.JPG

DSCN4922.JPG

DSCN4961.JPG

1.875 knob.dxf

2 inch knob.dxf

2.5 knob.dxf

knod shape for table 2.5 inch.dxf

knod shape for table 4 inch with slots.dxf

[cuttinparts]

Those will be pretty handy, what a great idea, thanks Tom

[adbuch]

Tom - very cool! I cut something similar once for the knob on my hobby press brake jack. As I recall, I cut it too fast and had lots of taper around the corners. That was before I knew about setting my corner acceleration to a smaller value for these sorts of cuts. But it turned out OK and does the job.

Thanks for sharing your files. I downloaded them and will check them out, and perhaps put them all in a single file.

David

plasma cut knob on press brake jack valve.jpg

[adbuch]

Tom - here they are all in a single file. Very nice job!
David

Knobs from Tom.dxf image.jpg

Knobs from Tom.dxf

[acourtjester]

Happy to help, small payback

[Sampson Jones]

Thanks !