Help with logo

If you are looking for help with a file conversion please post it here rather than in the file sharing forums.
Post Reply
OverlandTJ77
1 Star Member
1 Star Member
Posts: 16
Joined: Fri Aug 30, 2024 10:42 pm

Help with logo

Post by OverlandTJ77 »

Can anyone help me with my logo still learning on my table and trying to get this figured out. Needing some help with logo to be able to cut it out on my table!
OverlandTJ77
1 Star Member
1 Star Member
Posts: 16
Joined: Fri Aug 30, 2024 10:42 pm

Re: Help with logo

Post by OverlandTJ77 »

martin.png

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
ben de lappe
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1294
Joined: Mon Aug 03, 2009 9:37 am
Location: North Mississippi

Re: Help with logo

Post by ben de lappe »

The first thing to determine when it comes to making a design to cut is what size you need/want it to be. Next would be how you intend to represent it, one layer or multiple or possibly even a combination. Also it wouldn't hurt to let us know what program you're using to draw with so an explanation of these processes may be given. With the above information I'm sure we can help you get things sorted.
OverlandTJ77
1 Star Member
1 Star Member
Posts: 16
Joined: Fri Aug 30, 2024 10:42 pm

Re: Help with logo

Post by OverlandTJ77 »

Im going to be cutting it out for a 4x4 sign, will just be one layer and using fusion 360
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 10135
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Help with logo

Post by adbuch »

Here it your file. You will need to decide how you want to cut it - layered or edited to make it cuttable in a single layer.
David
martin welding dxf image.jpg
Martin Welding.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

OverlandTJ77
1 Star Member
1 Star Member
Posts: 16
Joined: Fri Aug 30, 2024 10:42 pm

Re: Help with logo

Post by OverlandTJ77 »

adbuch wrote: Wed Oct 30, 2024 7:38 pm Here it your file. You will need to decide how you want to cut it - layered or edited to make it cuttable in a single layer.
David

martin welding dxf image.jpg
Martin Welding.dxf
How should I go about cutting this trying to keep everything held together?
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 10135
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Help with logo

Post by adbuch »

OverlandTJ77 wrote: Wed Oct 30, 2024 7:41 pm
adbuch wrote: Wed Oct 30, 2024 7:38 pm Here it your file. You will need to decide how you want to cut it - layered or edited to make it cuttable in a single layer.
David

martin welding dxf image.jpg
Martin Welding.dxf
How should I go about cutting this trying to keep everything held together?
I will get back to you later this evening. Right now I've got parts to machine and orders to pack.
David
OverlandTJ77
1 Star Member
1 Star Member
Posts: 16
Joined: Fri Aug 30, 2024 10:42 pm

Re: Help with logo

Post by OverlandTJ77 »

adbuch wrote: Wed Oct 30, 2024 7:42 pm
OverlandTJ77 wrote: Wed Oct 30, 2024 7:41 pm
adbuch wrote: Wed Oct 30, 2024 7:38 pm Here it your file. You will need to decide how you want to cut it - layered or edited to make it cuttable in a single layer.
David

martin welding dxf image.jpg
Martin Welding.dxf
How should I go about cutting this trying to keep everything held together?
I will get back to you later this evening. Right now I've got parts to machine and orders to pack.
David
No worries appreciate the help so far!
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 10135
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Help with logo

Post by adbuch »

Martin 3 versions image.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 10135
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Help with logo

Post by adbuch »

If you want to modify the file to look like the yellow version shown above, you can start with this one (dxf attached below) and edit with your Fusion 360. You will need to stencil some of the letters and break the rings and inner logo to match the yellow image. Let me know if you have questions or get stuck doing your Fusion 360 edit and I will try to help you.

I am assuming that you are using Fusion 360 for your drawings as well as creating your cut paths and g-code. Have you had any experience using Inkscape for your drawings? The editing I mentioned above would be much easier and quicker to do using Inkscape or similar drawing program. Then you can save your edited drawing as either svg or dxf for import to Fusion 360.

David
Martin Welding Version 1.dxf image.jpg
Martin Welding version 1.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Last edited by adbuch on Wed Oct 30, 2024 10:21 pm, edited 1 time in total.
User avatar
Joe Jones
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3486
Joined: Sat Oct 11, 2014 2:33 pm
Location: Franklin, KY., USA
Contact:

Re: Help with logo

Post by Joe Jones »

The very first thing you should do WHENEVER someone gives you a logo like this and asks, "Can you make this?" is to ask your customer ... "Do you know the NAME of this FONT?"

There are a million fonts out there, and if the customer is okay with "close enough" then it is fairly easy to make this logo. However, if the customer says it must match EXACTLY, and they do not have the name of the font, or they cannot tell you WHO created the original logo (so you can contact the author and ask for the font name) the price automatically DOUBLES.

Either you have to manually draw the text, or you have to go on a witch hunt to find the EXACT FONT used to create the original logo.

You may discover that the original author has a Copyright on the logo, and forbids reproduction of it without his expressed written consent. A fast way to be SUED and YOU WILL LOSE in court, is to reproduce something like this without any assurance that you have the Right to reproduce the image.

The customer may have paid someone to create the logo, but signed some agreement that it will not be reproduced without the original author's consent, or perhaps the author retains the exclusive Right to reproduce the logo. This is especially true if the original font was somehow manipulated, skewed, or otherwise altered for style or individuality. That alteration is the PROPERTY of the author.

That said, I played with this for a while. I could not find the actual font used. However, I found something close. Here is a .jpg image of my "close enough" effort.

Joe
JJ - MARTIN WELDING LOGO - 2 JPG.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

PlasmaCam 4x4, Samson 510 table, Go Torch, + more
AD-AH-AM-AN-3D-CS-MU-PC - Upgrades

X-TOOL D1 PRO (x 4) F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2) + accs.
LaserPecker 1 PRO, LP-2, LP-4 + accs
50 Watt GALVO fiber
TYVOK Spider S1 60W Diode Laser 49" x 96"
SwiftShape 3-in-1 machine

CreatBot D600 PRO
Stratasys Fortus 400mc
BIGREP Studio Gen 2
MODIX Big Meter
MakerBOT Z-18 3D Printer

Bernardo Mach 55 TON Ironworker

FREE DesignEdge Training Online Via ZOOM!
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 10135
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Help with logo

Post by adbuch »

OverlandTJ77 wrote: Wed Oct 30, 2024 2:05 pm Can anyone help me with my logo still learning on my table and trying to get this figured out. Needing some help with logo to be able to cut it out on my table!
PM sent. Please check your Private Messages inbox.
Thanks,
Dvaid
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 10135
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Help with logo

Post by adbuch »

OverlandTJ77 wrote: Thu Oct 31, 2024 8:31 am Appreciate the message and these look great! Thank you for taking the time out of your day! :Yay
Happy to help as always! Be sure to let us know how you make out with your project and if you have any questions about modifying the file for cutting.

Thanks,
David
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 10135
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Help with logo

Post by adbuch »

OverlandTJ77 wrote: Wed Oct 30, 2024 2:05 pm Can anyone help me with my logo still learning on my table and trying to get this figured out. Needing some help with logo to be able to cut it out on my table!
I have responded to the PM you sent me today (11/6/24) about help with another logo.
Please check your Private Messages inbox.
Thanks,
David
Post Reply

Return to “File Conversion Help Wanted”