Anyone have a Cutmaster 101 they want to sell as parts. I have an IGBT board and output diode that is blown.
Thanks
Eddie (Melbourne, Fl)
Anyone have a Cutmaster 101 plasma for parts?
-
etgainey
- 1 Star Member
- Posts: 13
- Joined: Sun Nov 30, 2008 2:17 pm
- Location: Melbourne, Florida
-
john78
- 1.5 Star Member
- Posts: 33
- Joined: Wed Jun 28, 2017 7:53 am
Re: Anyone have a Cutmaster 101 plasma for parts?
You will need to replace the main power board and both IGBT's. Possibly the input diode and logic board. Did it trip your beaker when it failed? Be careful doing that repair if you decide to go that way. If it came into my shop I would tell you it wasn't cost effective to repair and to buy a new unit.
4x4 Plasma Table
Mach3 with CSMIO/IP-S
CandCNC Feather Touch & LCTHC
Hypertherm PMX 1000
Homemade Rotary Plasma Attachment
Mach3 with CSMIO/IP-S
CandCNC Feather Touch & LCTHC
Hypertherm PMX 1000
Homemade Rotary Plasma Attachment
-
Collector
- 1/2 Star Member
- Posts: 1
- Joined: Tue Jan 30, 2024 10:26 pm
Re: Anyone have a Cutmaster 101 plasma for parts?
Did you ever find parts and get your cutter working?
