Hello from Texas

BullocksTorch86 · Post by **BullocksTorch86** » Sun Jun 04, 2023 3:02 pm

Hello everyone my name is Boston and I have been involved with CNC machining and programming for 23 years. I’m here to continue learning and join this great community. I have a Langmuir XR that I use Fusion360 and SheetCAM to cut with. Thanks to everyone in advance!!!

Post by **adbuch** » Sun Jun 04, 2023 7:44 pm

Welcome aboard Boston! Langmuir makes some great tables, and that Fusion 360/Sheetcam combo is hard to beat. What kind of cutter do you have, and what sorts of projects are you making with your table? Feel free to share a few photos of your setup and some of your work.

David

BullocksTorch86 · Post by **BullocksTorch86** » Mon Jun 05, 2023 9:26 pm

I’m using a Hypertherm 45xp. I’m currently just messing around with material and settings. Hoping to get into some bigger projects soon.

Post by **adbuch** » Mon Jun 05, 2023 9:31 pm

I have great luck using the FineCuts with my 45xp and 85 for cutting 10 ga. and thinner material. Better detail cuts on thin material with less warping.

David

BullocksTorch86 · Post by **BullocksTorch86** » Mon Jun 05, 2023 9:43 pm

That’s good to hear. I just received some fine cut consumables a few days ago hoping to help with this.

Post by **adbuch** » Tue Jun 06, 2023 1:35 am

BullocksTorch86 wrote: ↑Mon Jun 05, 2023 9:43 pm That’s good to hear. I just received some fine cut consumables a few days ago hoping to help with this.

For best results, just make sure you are using OEM Hypertherm consumables and not the Amazon China knock-offs.
David

Hello from Texas

Hello from Texas

Re: Hello from Texas

Re: Hello from Texas

Re: Hello from Texas

Re: Hello from Texas

Re: Hello from Texas