Aftermarket Duramax Torch

[dsanford55]

I've got a Hypertherm powermax 85 which uses a duramax torch. Is there an aftermarket hand held torch available?
Thx

[acourtjester]

Not sure if you can find one other then from Hypertherm, torch designs may be different. And also the plug on the lead matching the Hypertherm's panel.

[SegoMan DeSigns]

Like Tom says OEM is the only way to go, did this come with a machine torch for the plasma table? SYNC or non SYNC?

[dsanford55]

when I bought the machine it came with a duramax machine torch. I know other mfgs. make MIG guns for different machines didn't know about a plasma.

[SegoMan DeSigns]

These are for the older Non "SYNC" system / 75* hand torch:

25'

https://bakersgas.com/products/hyperthe ... 4403366965

50'

https://bakersgas.com/products/hyperthe ... 4404218933

75'

is available as well

Here is the download section for your 85 machine, save all docs to your hard drive for future use

https://www.hypertherm.com/en-US/resour ... ish%20(US)

[JoeBG]

I know Thermacut makes aftermarket torches for the Powermax.

[adbuch]

For best results stick with the OEM Hypertherm torch and consumables.

David