Line Test and Pronest LT

Cut quality issues can be discussed here, most common issues have been discussed here and should help you.
Post Reply
rick_b
2 Star Member
2 Star Member
Posts: 56
Joined: Sat Aug 20, 2016 9:00 pm
Location: Australia

Line Test and Pronest LT

Post by rick_b »

I am new to Hypertherm's Pronest LT and phoenix software, has anyone ever set up a line test using it?
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 10063
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Line Test and Pronest LT

Post by adbuch »

Rick - exactly what do you mean by "line test"?
Thanks,
David
rick_b
2 Star Member
2 Star Member
Posts: 56
Joined: Sat Aug 20, 2016 9:00 pm
Location: Australia

Re: Line Test and Pronest LT

Post by rick_b »

David,

10 or 15 straight lines all set at different speeds and amps to see what works the best.
line test 1.jpg
line test 1.jpg (54.44 KiB) Viewed 3579 times
line test 1.jpg
line test 1.jpg (54.44 KiB) Viewed 3579 times
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 10063
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Line Test and Pronest LT

Post by adbuch »

I assume that the software/hardware you are using has the capability to do this automatically? For most of us, we would have to manually change the settings and current level between each test line.

David
rick_b
2 Star Member
2 Star Member
Posts: 56
Joined: Sat Aug 20, 2016 9:00 pm
Location: Australia

Re: Line Test and Pronest LT

Post by rick_b »

My last 3 machines I have been able to do this, but with this new machine which has all Hypertherm setup I don't seem to be able to do it. Funny it's more hi-tech but I can do less with it.
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 10063
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Line Test and Pronest LT

Post by adbuch »

Perhaps contact the manufacturer tech support to see what has changed from the previous versions.
David
Post Reply

Return to “Plasma Cut Quality Forum”