Something very similar to that. Sadly, I don't have a bridgeport but the size is R8...I would have to get a count on exactly how many we have. I'm sure it would be fairly easy to dMill. But figured id look at the one posted to see if it would work. I'm thinking maybe a free standing rack would be better for my space as I'm not positive there is a great place to mount it on my mill.
Tool & Garage Organization Thread
-
- 2 Star Member
- Posts: 64
- Joined: Mon Dec 05, 2022 10:07 am
Re: Tool & Garage Organization Thread
-
- 6 Star Elite Contributing Member
- Posts: 9639
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Tool & Garage Organization Thread
Let me know how many holes and if you want for free-standing and I will draw something up.
David
David
-
- 6 Star Elite Contributing Member
- Posts: 9639
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Tool & Garage Organization Thread
Here is one that might work for you. The slots cut along the bend lines will help to facilitate manual bending.
David
David
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2 Star Member
- Posts: 64
- Joined: Mon Dec 05, 2022 10:07 am
Re: Tool & Garage Organization Thread
Hey that looks pretty good! I'll probably just end up using that. Thanks a million!
-
- 1 Star Member
- Posts: 14
- Joined: Mon Jan 20, 2020 9:35 am
Re: Tool & Garage Organization Thread
Just a couple of files for the organization thread. I hope ya'll enjoy them.
I know it sure helped me organize my "mess", LOL
I know it sure helped me organize my "mess", LOL
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 3 Star Elite Contributing Member
- Posts: 316
- Joined: Sat Oct 08, 2016 12:26 pm
Re: Tool & Garage Organization Thread
Thank for the file
REX
REX
plasmacam 4x8 with DHC2 with Design Edge
Hypertherm 65
Hypertherm 65
-
- 6 Star Elite Contributing Member
- Posts: 9639
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Tool & Garage Organization Thread
You are quite welcome! Happy to help.
David
-
- 6 Star Elite Contributing Member
- Posts: 9639
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Tool & Garage Organization Thread
Kevin - thanks for sharing your designs! Nice clean files and very well though out.
David
- pimptastic08
- 1/2 Star Elite Contributing Member
- Posts: 3
- Joined: Tue May 24, 2016 1:55 pm
- Contact:
Re: Tool & Garage Organization Thread
Sweet!!! Happy to see my upload was put to use and improved upon, awesome job!tinspark wrote: ↑Thu Aug 25, 2022 1:50 am Here is a welding tool holder bracket that I made for our local sheet metal workers welding school where I instruct one of the evening classes for our apprentices. I found the tip dip and welding pliers holder a few years back and burned one for my home shop (https://plasmaspider.com/viewtopic.php? ... ip#p161238 Then a few days ago our apprenticeship coordinator asked me to come up with something to hold some of our tools for our welding shop. I loved the one that I burned a few years back and modified it a bit and added a place for a wire brush, chipping hammer, and up to a few C-Grips.
I burned 10 of the attached DXF file from 12 gauge for our welding booths and installed them earlier this evening.
Maybe U have use for one, or 10
screenshop- tool holder.PNGTip Dip and Cutter holder.dxf10 booths.jpgholder to wall.jpg10 holder
-
- 1/2 Star Member
- Posts: 3
- Joined: Mon Jan 17, 2022 8:59 am
Re: Tool & Garage Organization Thread
Some great ideas/designs on this thread. Anyone have anything for rolls of tape? Masking, duct, etc.
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3377
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Tool & Garage Organization Thread
Do you want to grab a roll from a shelf to use elsewhere, or do you want to dispense the tape FROM the holder on the bench wall or bench top?
Joe
Bitten by the laser bug.
Now my PlasmaCAM tables fight for attention!
X-TOOL D1 PRO (x 4 ? ) w/20W, 40W and 2W-IR heads + accs
X-TOOL F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2)
LaserPecker 1 PRO, LP-2, LP-4 and accs
50 Watt GALVO fiber laser
TYVOK Spider S1 60W Diode Laser 49" x 96"
CreatBot D600 PRO 3D printer
Stratasys Fortus 400mc 3D Printer
Obscene Levels of Debt
No help.
FREE DesignEdge Training Via ZOOM!
Now my PlasmaCAM tables fight for attention!
X-TOOL D1 PRO (x 4 ? ) w/20W, 40W and 2W-IR heads + accs
X-TOOL F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2)
LaserPecker 1 PRO, LP-2, LP-4 and accs
50 Watt GALVO fiber laser
TYVOK Spider S1 60W Diode Laser 49" x 96"
CreatBot D600 PRO 3D printer
Stratasys Fortus 400mc 3D Printer
Obscene Levels of Debt
No help.
FREE DesignEdge Training Via ZOOM!
-
- 1/2 Star Member
- Posts: 6
- Joined: Fri Mar 31, 2023 3:00 pm
Re: Tool & Garage Organization Thread
tinspark wrote: ↑Thu Nov 19, 2020 6:11 pmI had to look that one up too. It looks like a base plate for Milwaukee's organizer system that can also be mounted on a side wall.
it would keep things from sliding around the back of the truck nicely.
I have several of their storage bins. Would be helpful under certain applications/conditions IMO.
https://www.homedepot.com/p/Milwaukee-P ... /310990289
You can buy the file from etsy, I have used it several times and it works great.
- tinspark
- 3.5 Star Elite Contributing Member
- Posts: 695
- Joined: Wed May 30, 2018 4:28 pm
Re: Tool & Garage Organization Thread
Good to know...Osborn89 wrote: ↑Tue Apr 04, 2023 10:40 amtinspark wrote: ↑Thu Nov 19, 2020 6:11 pmI had to look that one up too. It looks like a base plate for Milwaukee's organizer system that can also be mounted on a side wall.
it would keep things from sliding around the back of the truck nicely.
I have several of their storage bins. Would be helpful under certain applications/conditions IMO.
https://www.homedepot.com/p/Milwaukee-P ... /310990289
You can buy the file from etsy, I have used it several times and it works great.
Doug,
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"
4x4 GoTorch- expanded
Height Control/Advanced DesignEdge
Hypertherm 45XP-
Logan Lathe + myriads of other shop toys
**CAUTION**- "Does Not Play Well With Others"
-
- 2 Star Member
- Posts: 57
- Joined: Sun Sep 17, 2023 3:06 am
Re: Tool & Garage Organization Thread
We need to keep this going!!
It's great reading all of the comments and awesome ideas that have shared here. Only negative thing I can think to say is I wish I joined years ago
It's great reading all of the comments and awesome ideas that have shared here. Only negative thing I can think to say is I wish I joined years ago
-
- 2.5 Star Elite Contributing Member
- Posts: 185
- Joined: Tue Aug 30, 2022 9:34 am
Re: Tool & Garage Organization Thread
I agree, this is a great thread. Once I have something to add I will be sure to share it.
DIY 4x8 table
Powermax 65
Powermax 65
-
- 1/2 Star Member
- Posts: 6
- Joined: Fri Mar 31, 2023 3:00 pm
Re: Tool & Garage Organization Thread
Student built this for a show and had orders for 6 more. It is pretty simple, casters get costly but HF has a good price. I can add files later.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Last edited by Osborn89 on Thu Nov 30, 2023 9:18 am, edited 1 time in total.
- Scratch
- 3.5 Star Elite Contributing Member
- Posts: 826
- Joined: Tue Sep 01, 2009 9:07 pm
- Location: Hudson,WI
- Contact:
Re: Tool & Garage Organization Thread
Can’t see pics…
I think I'm the oldest 10 year old boy on the forum...
-
- 1/2 Star Member
- Posts: 4
- Joined: Sat Dec 17, 2022 7:21 pm
-
- 1/2 Star Member
- Posts: 6
- Joined: Fri Mar 31, 2023 3:00 pm
-
- 3 Star Member
- Posts: 293
- Joined: Thu Jul 19, 2012 3:36 am
Re: Tool & Garage Organization Thread
now that's a cool grinder stand, great idea and great student project
-
- 1/2 Star Member
- Posts: 6
- Joined: Fri Mar 31, 2023 3:00 pm
- Joe Jones
- 5 Star Elite Contributing Member
- Posts: 3377
- Joined: Sat Oct 11, 2014 2:33 pm
- Location: Franklin, KY., USA
- Contact:
Re: Tool & Garage Organization Thread
Yeah. That is the thing about caster wheels. You have to figure out the balance with all of the wheels rotated fully INWARD to know the minimal support points beneath the load. You could make another plate and put it beneath the first one, moving the wheels out another five inches or so.
Joe
Bitten by the laser bug.
Now my PlasmaCAM tables fight for attention!
X-TOOL D1 PRO (x 4 ? ) w/20W, 40W and 2W-IR heads + accs
X-TOOL F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2)
LaserPecker 1 PRO, LP-2, LP-4 and accs
50 Watt GALVO fiber laser
TYVOK Spider S1 60W Diode Laser 49" x 96"
CreatBot D600 PRO 3D printer
Stratasys Fortus 400mc 3D Printer
Obscene Levels of Debt
No help.
FREE DesignEdge Training Via ZOOM!
Now my PlasmaCAM tables fight for attention!
X-TOOL D1 PRO (x 4 ? ) w/20W, 40W and 2W-IR heads + accs
X-TOOL F1, S1 (x3), P2 (x2), F1 ULTRA (x2) with conveyors, M1 ULTRA (x2)
LaserPecker 1 PRO, LP-2, LP-4 and accs
50 Watt GALVO fiber laser
TYVOK Spider S1 60W Diode Laser 49" x 96"
CreatBot D600 PRO 3D printer
Stratasys Fortus 400mc 3D Printer
Obscene Levels of Debt
No help.
FREE DesignEdge Training Via ZOOM!
-
- 1.5 Star Elite Contributing Member
- Posts: 33
- Joined: Tue Jan 11, 2011 8:06 pm
Re: Tool & Garage Organization Thread
I know there are some educators on the site and maybe these files may help students with tool cabinet organization. I wanted to share a couple tool cabinet files I created. Hopefully they are useful to someone.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1.5 Star Elite Contributing Member
- Posts: 33
- Joined: Tue Jan 11, 2011 8:06 pm
Re: Tool & Garage Organization Thread
I know there are some educators on the site and maybe these files may help students with tool cabinet organization. I wanted to share a couple tool cabinet files I created. Hopefully they are useful to someone.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1.5 Star Elite Contributing Member
- Posts: 33
- Joined: Tue Jan 11, 2011 8:06 pm
Re: Tool & Garage Organization Thread
I know there are some educators on the site and maybe these files may help students with tool cabinet organization. I wanted to share a couple tool cabinet files I created. Hopefully they are useful to someone.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here