Voltage divider setting
-
OTHill
- 3.5 Star Elite Contributing Member
- Posts: 572
- Joined: Fri Jul 20, 2012 12:08 pm
Voltage divider setting
I've searched high and low can't get a direct answer. What is the voltage divider setting for 45xp running candcnc bladerunner.
5x10 table,Precision plasma gantry,Cand CNC electronics,Hypertherm 65 plasma,King lathe and mill,255 lincoln mig welder.Dawson Creek BC. Much modified Fastcut 4x8 plasma table with Ethercut
-
robertspark
- 4.5 Star Elite Contributing Member
- Posts: 1832
- Joined: Mon Jun 12, 2017 6:43 pm
Re: Voltage divider setting
https://www.google.com/url?q=http://can ... GsFsFOO-Sw
pdf page 16/90 should answer your question.
basically 20:1 or 50:1
the 20:1:is listed as preferred
pdf page 16/90 should answer your question.
basically 20:1 or 50:1
the 20:1:is listed as preferred
-
OTHill
- 3.5 Star Elite Contributing Member
- Posts: 572
- Joined: Fri Jul 20, 2012 12:08 pm
Re: Voltage divider setting
Thanks robertspark! Than the next question how to wire my hand torch on 45xp for cnc cutting? Preferably a picture as I don't always understand all the modern jargon. I remember doing it on my 65 10 years ago but suppose 45 is different?
5x10 table,Precision plasma gantry,Cand CNC electronics,Hypertherm 65 plasma,King lathe and mill,255 lincoln mig welder.Dawson Creek BC. Much modified Fastcut 4x8 plasma table with Ethercut
-
djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 2024
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Voltage divider setting
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
