Sorry for my english, google translates.
I need to cut a fox out of a fairy tale for her granddaughter.
Will my colleagues help me make a dxf from this jpg
Thank you in advance
Greetings from Poland
I badly need help
-
pero8
- 1/2 Star Member
- Posts: 7
- Joined: Wed May 09, 2018 3:50 pm
I badly need help
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
acourtjester
- 6 Star Elite Contributing Member
- Posts: 8183
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: I badly need help
Hi Pero8 If you are not set on that exact image there are many other clip arts on Google you could chose another to cut.
https://www.google.com/search?source=un ... =771&dpr=1
https://www.google.com/search?source=un ... =771&dpr=1
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 10140
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: I badly need help
See if this will work for you.
David
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
pero8
- 1/2 Star Member
- Posts: 7
- Joined: Wed May 09, 2018 3:50 pm
Re: I badly need help
Thank you very much, you guys are great. I tried to learn, but I guess I'm too old. I can do it somehow, but jpg is black magic for me. Thanks again and sorry for the English.
Regards.
Regards.
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 10140
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: I badly need help
You are welcome! Please show us a photo of your work after you finish it.
David
-
pero8
- 1/2 Star Member
- Posts: 7
- Joined: Wed May 09, 2018 3:50 pm
Re: I badly need help
I will and thank you again.
-
pero8
- 1/2 Star Member
- Posts: 7
- Joined: Wed May 09, 2018 3:50 pm
Re: I badly need help
Hello everyone.
The fox that has been cut now goes to the powder coating.
Thank you David, could you teach me this?
The fox that has been cut now goes to the powder coating.
Thank you David, could you teach me this?
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 10140
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: I badly need help
I actually used Plasmacam Design Edge to do the manual trace and create the stars. Since you don't have access to Design Edge, you could use Inkscape to do a manual trace. It will be much more time consuming, but will work. Here are some steps using Inkscape to show you the basic method. I have started with the photo you just showed for your finished part. But you can trace anything as long as you can see it clearly.
David
This last one shows what it looks like when I open it with Design Edge. And here is the cut path preview.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
pero8
- 1/2 Star Member
- Posts: 7
- Joined: Wed May 09, 2018 3:50 pm
Re: I badly need help
Thank you very much for help.
I will learn
I will learn
