consumables for ag60 sg55 torch

[zultek]

Hello- I have a simadre 60sp that uses a ag60 sg55 torch. I want to find some tips for fine cutting and don't see any options. Please let me know some options, also can I use a different torch style as my torch only has a 2 pin trigger connector a air hose and a red wire for arc voltage. any ideas would be nice
Thanks

[weldguy]

I am not at all familiar with your plasma, you may be best to contact the manufacturer and ask if they offer a tip for fine cutting.

Why are you wanting to replace the torch? Sounds like your torch has all the wires you need.

[zultek]

Hello- was looking for a torch that uses fine cut tips my torch is good but the hole in tip is 0.055 dia. and trying to made a smaller kerf thanks

[Greolt]

Nozzles can be had in 0.9, 1.0 and 1.2 for that style torch.

I use 0.9 mostly.

[zultek]

Hello- Where do you buy the nozzles
Thanks

[Greolt]

Here is just one example

https://www.ebay.com/str/riverwelder/40 ... 2708881013

[zultek]

Thanks for the info

[mechanic416]

0.9mm/40 amp tips are the smallest you will find for that torch.