Help needed

Post by **adbuch** » Tue Nov 17, 2020 2:16 am

Assuming your file was drawn in metric (mm), the overall height is about 25 inches. What size are you planning to cut it? The overall size and kerf width will dictate what detail can be produced. What material thickness are you using?
David

UK military badge image.jpg

Post by **adbuch** » Tue Nov 17, 2020 4:45 am

OK. So about 24" tall. Which features are you willing to leave out?
David

Post by **adbuch** » Tue Nov 17, 2020 4:52 am

OK. Laser vs. plasma makes a huge difference (laser more precise with less heat and very narrow kerf). You do realize that you have two separate parts. Here is the outer perimeter of the cut.
David

external cut paths.jpg

Post by **adbuch** » Tue Nov 17, 2020 4:58 am

In what manner does it "mess up"?
David

Post by **adbuch** » Tue Nov 17, 2020 5:00 am

Do you want to connect the upper and lower parts for a single piece?
David

Post by **adbuch** » Tue Nov 17, 2020 5:05 am

He could also do some laser engraving for some of the details. I have this done with some of my parts by the local cnc laser shop. They can very the pulse width and power to create different effects with the "engraving". You would need to specify to your programmer which paths would receive this treatment.
David

radiusgauge2.jpg

Post by **adbuch** » Tue Nov 17, 2020 5:08 am

Your original dxf file had very many intersections, which could have also potentially contributed to your problems cutting. I have cleaned up your file and eliminated all intersections, which may also help. I will submit the new file after we decide on the editing format to eliminate some of the details you referred to.
David

Post by **adbuch** » Tue Nov 17, 2020 5:17 am

Decide if you want any of the cut paths laser etched instead of cut, then tell me exactly which of the other cut paths (if any) you want deleted. As it is 3:15AM in Tucson, Arizona, USA - and I am about ready to call it a night, I will get back with you tomorrow (about 12-15 hours from now) to respond and edit your file.
David

Post by **adbuch** » Tue Nov 17, 2020 8:41 am

Oggy2para wrote: ↑Tue Nov 17, 2020 5:41 am Haha you get to bed mate that’s late
Nothing can be etched as it needs to be painted after. All the lines in the scroll can be deleted. All the detail in the rope around the anchor can be deleted. The detail at the bottom of the crown also.

Something like this?
David

edited file.jpg

Post by **adbuch** » Tue Nov 17, 2020 5:32 pm

UK military badge 1 image.jpg

Post by **adbuch** » Tue Nov 17, 2020 10:06 pm

Oggy2para wrote: ↑Tue Nov 17, 2020 5:37 pm Nearly, I think we need a few leaves in there and maybe just the outline of the continents ?
This is my WhatsApp if that’s easier ?

07714257005

Let's go ahead and take this "off-line". You can contact me via email at desert.hybrids@cox.net to continue our discussion.
Thanks,
David

UK military badge image 4.jpg

Post by **adbuch** » Wed Nov 18, 2020 2:50 am

Email received.
Thanks,
David

Help needed

Re: Help needed

Re: Help needed

Re: Help needed

Re: Help needed

Re: Help needed

Re: Help needed

Re: Help needed

Re: Help needed

Re: Help needed

Re: Help needed

Re: Help needed

Re: Help needed