Plasmacam users:
It has happened or will happen to all of us! A tip up or misfire causes the machine to stop cutting mid design. Design Edge puts up an error that you need to dismiss and unselects the paths that have already been cut so you can easily resume. BUT.....you dismiss the error and then accidentally click on the work space and now alllllll the selection is cleared.....
In this YouTube video, I explain how I recover from that without having to watch it trace all the already cut paths or guessing!
Design Edge Learning Series 003 - Select Window Tool
If you are wanting to come to the 3-day workshop coming up in March 2020, don't wait - only 8 seats left!
March 26-28 Tulsa Oklahoma Design Edge Workshop Registration
How to resume cutting when path selection is lost.
-
rdj357
- 4 Star Elite Contributing Member
- Posts: 1185
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
How to resume cutting when path selection is lost.
Robert Johnson
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
PlasmaCAM GURU & Instructor
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
