Incorrect measurements when opening files

[Plasron]

New problem guys, when I Import a DXF file into Sheetcam and measure it, it shows like 0.1 etc.
It just started doing this, worked fine before but now Sheetcam doesn't show the true measurements.
I uninstalled Sheetcam and reloaded it, but measure are not working
Thanks in advance for any help on what happened.
PS

[Les Newell]

Do you have the scaling set correctly when you import your drawing? It is more likely that your drawing is loading the wrong size than measure showing the wrong dimensions.

[Plasron]

Thanks Les
These are dxf files resized in Inkscape and saved.
I don’t know what’s happening.

[Les Newell]

It sounds like the resizing didn't work correctly. Using the results of teh measure tool you should be able to work out what scale factor you need. It may be better to load the dxf files directly rather than trying to resize them in Inkscape.

[Plasron]

Thanks Les
it was the scale factor change it from 1.1 to 1.25 and they are working in Sheetcam now
Thanks for the help