My scriber is dragging from letter to letter. How do I get my Z to come up in between scribes? Thanks guys!
I’m using sheetcam / Mach 3 and a touch off plasma system.
Easyscriber sheetcam settings Help...
-
Axlworks
- 1/2 Star Member
- Posts: 8
- Joined: Sat Apr 07, 2018 12:11 am
-
WyoGreen
- 4 Star Member
- Posts: 897
- Joined: Tue Mar 04, 2014 8:36 pm
- Location: Cheyenne, Wyoming
Re: easyscriber sheetcam settings Help...
Check your setting in Sheetcam--> Job Options--> Rapid clearance. You may need to increase this to a larger value, especially if your scribe is spring loaded.
Steve
Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
-
EasyScriber
- 2.5 Star Member
- Posts: 174
- Joined: Thu Dec 13, 2018 2:13 pm
- Contact:
