I also have the new A120 and every thing Leatherhands says is spot on, it pierces 20mm or 13/16 plate no problem at all and the cut quality is better and faster than I could ever have expected. On really thin stuff I could use a lower amperage setting than the minimum 30 amps as my table is limited to 3000mm/per/min or 10' per/min. But it still does a nice job on the really thin stuff anyway.
Ingenious.
ADDED BY ADMINISTRATOR
For more information on this Thermal Dynamics model visit this link:
http://www.thermadyne.com
Thermal A120...I love it
-
Ingenious
- 1/2 Star Member
- Posts: 4
- Joined: Wed May 13, 2009 4:40 am
Re: THERMAL DYNAMICS Plasma Cutters - Plasma Cutting Torches
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Last edited by admin on Mon Sep 28, 2009 12:15 am, edited 2 times in total.
Reason: Thermal Dynamcis A120 Manufacturers Webiste Link Added
Reason: Thermal Dynamcis A120 Manufacturers Webiste Link Added
-
RayRay
- 1 Star Member
- Posts: 11
- Joined: Fri Oct 02, 2009 7:37 pm
- Location: Ft. Worth, Texas
Re: THERMAL DYNAMICS Plasma Cutters - Thermal Plasma
Anyone has comments on the A80 Cutmaster that I order with my CNC table from plasmaroutecnc
RayRay
RayRay
-
lzmetals
- 1 Star Member
- Posts: 23
- Joined: Fri Apr 01, 2011 11:33 pm
Re: Thermal A120...I love it
I have the A60 and I seem to be getting alot of slag on the backside of the cut. I have adjusted the speed up and down and do not get a change. I gave tried adjusting the air preasure also not sure what to try next. I also tried new tip an electrode
