I know I've seen it but can't find it.
What is the recommended lead in length when possible?
I have a Powermax 85.
Thank you, Jim
Lead In Length
-
djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 2024
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Lead In Length
I usually go with the material thickness on thicker stuff. Or 1/8" or so for thin sheet metal.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
