Mk3 Diy breakaway torch mount

Share and learn with other DIY members who have built their own plasma tables and accessories.
Post Reply
User avatar
SeanP
4 Star Member
4 Star Member
Posts: 951
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Mk3 Diy breakaway torch mount

Post by SeanP »

Had to go a little bigger for the new Duramax torch so had a rethink.

Easy enough to make up, you just need 3 x 12mm bearings and 2 magnets (I cut one in half)

Bearings tig welded in, magnets stuck with double sided tape.

Torch clamps I used 10mm and 5mm for the plates.

I can post detailed info & dxf if anyone wan'ts them.
IMG_20171203_174705.jpg
IMG_20171203_135424.jpg
IMG_20171203_135449.jpg
IMG_20171203_135511.jpg
Breakaway mount drawing.jpg
Duramax torch clamp.DXF
Breakaway torch mounts back plate.DXF
Breakaway torch mount plate.DXF

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Last edited by SeanP on Mon Dec 04, 2017 3:48 pm, edited 2 times in total.
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
User avatar
Scratch
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 835
Joined: Tue Sep 01, 2009 9:07 pm
Location: Hudson,WI
Contact:

Re: Mk3 Diy breakaway torch mount

Post by Scratch »

Nice and simple... I like it!
I think I'm the oldest 10 year old boy on the forum...
beefy
4.5 Star Member
4.5 Star Member
Posts: 1503
Joined: Fri Jan 18, 2013 3:19 am

Re: Mk3 Diy breakaway torch mount

Post by beefy »

Thanks Sean,

I think I'll be using this principle when I make my breakaway. Cheap, easy and looks effective.

Who needs to pay $300 for a breakaway.

Keith.
2500 x 1500 water table
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8183
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Mk3 Diy breakaway torch mount

Post by acourtjester »

Looks like the old "KISS" process still works, very nice I'm sure it will be copied.
Are you going to put a disconnect switch with it?
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
User avatar
SeanP
4 Star Member
4 Star Member
Posts: 951
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: Mk3 Diy breakaway torch mount

Post by SeanP »

acourtjester wrote:Looks like the old "KISS" process still works, very nice I'm sure it will be copied.
Are you going to put a disconnect switch with it?
It's about time I did, I've had 2 leaks in the tray due to knocked off torch using previous design :lol:

Yes it works really well, better with the bigger bearings, took a bit of playing around with getting right hole size and magnet position, I'll edit post with details soon.
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8183
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Mk3 Diy breakaway torch mount

Post by acourtjester »

I your a good man Gunga din :D
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
User avatar
SeanP
4 Star Member
4 Star Member
Posts: 951
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: Mk3 Diy breakaway torch mount

Post by SeanP »

Had to google that one :x :lol:
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8183
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Mk3 Diy breakaway torch mount

Post by acourtjester »

Showing my age again :o :lol:
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
User avatar
steel 35
3.5 Star Member
3.5 Star Member
Posts: 634
Joined: Sun Jan 11, 2015 11:12 am
Location: N of Cali.

Re: Mk3 Diy breakaway torch mount

Post by steel 35 »

Those clamps cut out very nice, & the whole package is sweet.
PPL HDG 4X8
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
Euclid933
2 Star Elite Contributing Member
2 Star Elite Contributing Member
Posts: 67
Joined: Fri Oct 06, 2017 2:18 am
Location: N. Lincs, UK
Contact:

Re: Mk3 Diy breakaway torch mount

Post by Euclid933 »

Looks great. I'm looking at upgrading my table, it uses a set of ball bearings to run on the plate and a pneumatic ram to lift the torch.
I'd like to change it to something like yours, with THC. Just not sure what to go for at the moment.
I've had a couple of torch collisions over the years, really like your idea.
Will.
User avatar
SeanP
4 Star Member
4 Star Member
Posts: 951
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: Mk3 Diy breakaway torch mount

Post by SeanP »

More info added to post and dxf files for parts.
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
Euclid933
2 Star Elite Contributing Member
2 Star Elite Contributing Member
Posts: 67
Joined: Fri Oct 06, 2017 2:18 am
Location: N. Lincs, UK
Contact:

Re: Mk3 Diy breakaway torch mount

Post by Euclid933 »

Thanks Sean.
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8183
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Mk3 Diy breakaway torch mount

Post by acourtjester »

thanks again
filed away to due when I get home
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
david47julie
1.5 Star Elite Contributing Member
1.5 Star Elite Contributing Member
Posts: 43
Joined: Sat Mar 16, 2013 12:17 am

Re: Mk3 Diy breakaway torch mount

Post by david47julie »

Thanks, that is a great idea I have been thinking about building one but I had not come up with a good idea yours looks great! Thanks again.
Greg_R
1.5 Star Member
1.5 Star Member
Posts: 34
Joined: Sun Jan 14, 2018 10:31 pm

Re: Mk3 Diy breakaway torch mount

Post by Greg_R »

I accidently found a youtube video of shapes you make using magnetic balls. It may take some experimenting with placement, but that would knock out 2 birds with one stone. I don't have a torch set up yet, since I am in the planning stages.
I could make this my first cut, but if something goes wrong during setup...
Would anyone mind selling me the metal cut outs?

https://www.aliexpress.com/item/50pcs-1 ... autifyAB=2
Greg_R
1.5 Star Member
1.5 Star Member
Posts: 34
Joined: Sun Jan 14, 2018 10:31 pm

Re: Mk3 Diy breakaway torch mount

Post by Greg_R »

[quote="Greg_R"]I accidently found a youtube video of shapes you make using magnetic balls. It may take some experimenting with placement, but that would knock out 2 birds with one stone. I don't have a torch set up yet, since I am in the planning stages.
I could make this my first cut, but if something goes wrong during setup...
Would anyone mind selling me the metal cut outs?

Edit: that link is not magnetic balls...
Greg_R
1.5 Star Member
1.5 Star Member
Posts: 34
Joined: Sun Jan 14, 2018 10:31 pm

Re: Mk3 Diy breakaway torch mount

Post by Greg_R »

Greg_R
1.5 Star Member
1.5 Star Member
Posts: 34
Joined: Sun Jan 14, 2018 10:31 pm

Re: Mk3 Diy breakaway torch mount

Post by Greg_R »

I'll go with the square magnets like you did. Do you mind telling us the size and strength of the magnets? There are all kinds of strengths.
Greg_R
1.5 Star Member
1.5 Star Member
Posts: 34
Joined: Sun Jan 14, 2018 10:31 pm

Re: Mk3 Diy breakaway torch mount

Post by Greg_R »

Edit: that link is not magnetic balls...[/quote]
Greg_R
1.5 Star Member
1.5 Star Member
Posts: 34
Joined: Sun Jan 14, 2018 10:31 pm

Re: Mk3 Diy breakaway torch mount

Post by Greg_R »

Sorry don't know what's wrong with the forum and the double posting when editing.
User avatar
SegoMan DeSigns
4 Star Member
4 Star Member
Posts: 984
Joined: Sat Jan 06, 2018 4:45 pm

Re: Mk3 Diy breakaway torch mount

Post by SegoMan DeSigns »

Nice design,

You could add tabs to the torch mounting piece to hold some alignment lasers as well. The ones on fleebay require a 1/2" hole.
User avatar
SeanP
4 Star Member
4 Star Member
Posts: 951
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: Mk3 Diy breakaway torch mount

Post by SeanP »

Have a look on that drawing Greg, the magnets I used are 19x 29 with one cut in half for the top two, been using it for a while now and it's spot on, very easy to lift off and re-locate, just the right hold.
Na don't bother with the mag balls, be a right pain welding those on! :shock: :lol:
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
User avatar
SeanP
4 Star Member
4 Star Member
Posts: 951
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

Re: Mk3 Diy breakaway torch mount

Post by SeanP »

SegoMan DeSigns wrote:Nice design,

You could add tabs to the torch mounting piece to hold some alignment lasers as well. The ones on fleebay require a 1/2" hole.
Good idea, I really would find those useful :!:
Powermax XP45
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw
Table build gallery
User avatar
trtilton61
2 Star Member
2 Star Member
Posts: 63
Joined: Mon Jul 15, 2013 4:45 pm

Re: Mk3 Diy breakaway torch mount

Post by trtilton61 »

Thanks,great looking set-up.
Precision Plasma HDSE-4x8
CandCNC Bladerunner dragon cut
Hypertherm 65
Mach3
sheetcam
Greg_R
1.5 Star Member
1.5 Star Member
Posts: 34
Joined: Sun Jan 14, 2018 10:31 pm

Re: Mk3 Diy breakaway torch mount

Post by Greg_R »

SeanP wrote:Have a look on that drawing Greg, the magnets I used are 19x 29 with one cut in half for the top two, been using it for a while now and it's spot on, very easy to lift off and re-locate, just the right hold.
Na don't bother with the mag balls, be a right pain welding those on! :shock: :lol:
Yes I did see the size of the magnets after posting that. Thanks so much for sharing!
Post Reply

Return to “DIY Plasma Table & Accessory Discussion Forum”