Whether outside your window

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
User avatar
Dennis
3 Star Member
3 Star Member
Posts: 326
Joined: Wed Feb 17, 2010 12:41 am
Location: BC , Canada

Re: Whether outside your window

Post by Dennis »

Whether :lol:
User avatar
AnotherDano
4 Star Member
4 Star Member
Posts: 802
Joined: Fri Dec 18, 2009 11:52 pm
Location: Laramie, Wyoming
Contact:

Re: Whether outside your window

Post by AnotherDano »

Give him a break,,, He's French. But possibly just a spammer.
:cry:
Dano Roberts
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
User avatar
Dennis
3 Star Member
3 Star Member
Posts: 326
Joined: Wed Feb 17, 2010 12:41 am
Location: BC , Canada

Re: Whether outside your window

Post by Dennis »

AnotherDano wrote:Give him a break,,, He's French. But possibly just a spammer.
:cry:

Ok I will play nice :lol:
User avatar
elkriverfab
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 488
Joined: Mon Jul 27, 2009 4:49 pm

Re: Whether outside your window

Post by elkriverfab »

I don't know about the wether but look in my window and you may just see my WALTHER :D
"OK, Now hold my beer and I'll try it"
User avatar
elkriverfab
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 488
Joined: Mon Jul 27, 2009 4:49 pm

Re: Whether outside your window

Post by elkriverfab »

elkriverfab wrote:I don't know about the wether but look in my window and you may just see my WALTHER :D
Wether, wather, weather, fether, whatever!!!!!
"OK, Now hold my beer and I'll try it"
User avatar
plasmajoe
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 674
Joined: Thu Jul 30, 2009 8:19 pm

Re: Whether outside your window

Post by plasmajoe »

La temperature est tres froide dehors se matin, ill fait -43 a se moment.

Translation reads for you non french, LOL, It is quite cold this morning it is -43 degrees Celcius at this moment.

Plasma Joe
oldsoulmetal
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 107
Joined: Wed Sep 22, 2010 12:07 am

Re: Whether outside your window

Post by oldsoulmetal »

further translation please to farenheit. no dont it still would be to dang cold. even for oregon
User avatar
Dennis
3 Star Member
3 Star Member
Posts: 326
Joined: Wed Feb 17, 2010 12:41 am
Location: BC , Canada

Re: Whether outside your window

Post by Dennis »

-43 C is -43 F :lol:
User avatar
Dennis
3 Star Member
3 Star Member
Posts: 326
Joined: Wed Feb 17, 2010 12:41 am
Location: BC , Canada

Re: Whether outside your window

Post by Dennis »

oldsoulmetal wrote:further translation please to farenheit. no dont it still would be to dang cold. even for oregon
Sorry for my ignorance :oops: -43C = -45.400000000000006 F :lol:
User avatar
plasmajoe
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 674
Joined: Thu Jul 30, 2009 8:19 pm

Re: Whether outside your window

Post by plasmajoe »

oldsoulmetal wrote:further translation please to farenheit. no dont it still would be to dang cold. even for oregon
Your right it is freggin cold still. -43 is still cold in Celcius or Farenhiet...LOL. It did warm up today though we are sitting at -41 Celcius but with a wind chill that feels like -48, what is a few degrees when it is this cold eh? Great time to warm up with the wife, that is what I say to my little honey :D .

Plasma Joe
Eagle Mtn Metal Works
3 Star Member
3 Star Member
Posts: 492
Joined: Sun Sep 12, 2010 11:18 pm
Location: AZ

Re: Whether outside your window

Post by Eagle Mtn Metal Works »

Hi Joe
You are welcome to come out to AZ and become a snowbird, and spend time out hear. I have an RV that you could stay in and even the PC to play with. :lol: It is going to be about in the high 60s today. :mrgreen:
Rod S in AZ
User avatar
plasmajoe
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 674
Joined: Thu Jul 30, 2009 8:19 pm

Re: Whether outside your window

Post by plasmajoe »

Eagle Mtn D&D wrote:Hi Joe
You are welcome to come out to AZ and become a snowbird, and spend time out hear. I have an RV that you could stay in and even the PC to play with. :lol: It is going to be about in the high 60s today. :mrgreen:
Well Rod I have to say thank you but I would never give this weather up for nothing, you can keep all the heat buddy, i enjoy the cold, actually the colder the better. My friends think I am nuts, I actually take my summer holidays up in the Canadian Artic to get out of the heat. LOL. Plus the fishing is AWESOME up here and there. So if you want to try out some fishing come on up this winter, the little buggers cant hide when we can walk up to them on the ice. :mrgreen:

Plasma Joe
User avatar
AnotherDano
4 Star Member
4 Star Member
Posts: 802
Joined: Fri Dec 18, 2009 11:52 pm
Location: Laramie, Wyoming
Contact:

Re: Whether outside your window

Post by AnotherDano »

Cold???

I was making the bed and the covers wouldn't lie flat. Pulling them back, I found an odd-shaped greenish 'object'

So I took it into the den near the fire, to try and figure out what it was. A few minutes later, I heard a familiar and obnoxious sound, then the room filled with a familiar and obnoxious odor.

THAT's Cold.

:lol:
Dano Roberts
droberts@ironpequod.com
PlasmaCam DHC-2 v3.11
Hypertherm PowerMax-30
Serving Laramie, Wy since Thursday
User avatar
plasmajoe
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 674
Joined: Thu Jul 30, 2009 8:19 pm

Re: Whether outside your window

Post by plasmajoe »

LMAO!!!!!!!!!! Good one Dano... :lol:

Plasma Joe
Eagle Mtn Metal Works
3 Star Member
3 Star Member
Posts: 492
Joined: Sun Sep 12, 2010 11:18 pm
Location: AZ

Re: Whether outside your window

Post by Eagle Mtn Metal Works »

Ya the summers can be a little rough but the winters are nice. :lol: Happy Fishing that is on the ice :lol:
Rod S in AZ
ronsii
2 Star Member
2 Star Member
Posts: 73
Joined: Sun Dec 26, 2010 8:35 pm

Re: Whether outside your window

Post by ronsii »

AnotherDano wrote:Cold???

I was making the bed and the covers wouldn't lie flat. Pulling them back, I found an odd-shaped greenish 'object'

So I took it into the den near the fire, to try and figure out what it was. A few minutes later, I heard a familiar and obnoxious sound, then the room filled with a familiar and obnoxious odor.

THAT's Cold.

:lol:

:lol: :lol: :lol: That sounds way too cold for me.
User avatar
plasmajoe
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 674
Joined: Thu Jul 30, 2009 8:19 pm

Re: Whether outside your window

Post by plasmajoe »

Finally the cold snap ended last night, we are sitting at -6 degrees Celcius and for my American friends that would be 21.2 degrees Fahrenheit. No wind chills just nice warm wintery day, time for the bathing suits and suntanning lotions, fishing rods and beer, ;) . Time for a day off "sick" on the ice.:P

Have a good day guys. :mrgreen:

Plasma Joe
jimcolt
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3087
Joined: Mon Jul 20, 2009 11:18 pm
Location: North Carolina

Re: Whether outside your window

Post by jimcolt »

Its up to 16 degrees F here in New Hampshire. Saw 28 below a couple of days ago. I can go outside with just a T shirt in this weather. It has been too cold to Ice Fish though! The beer freezes before the can is empty, trust me!

Jim
User avatar
plasmajoe
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 674
Joined: Thu Jul 30, 2009 8:19 pm

Re: Whether outside your window

Post by plasmajoe »

jimcolt wrote:Its up to 16 degrees F here in New Hampshire. Saw 28 below a couple of days ago. I can go outside with just a T shirt in this weather. It has been too cold to Ice Fish though! The beer freezes before the can is empty, trust me!

Jim
Jim I think you are doing something wrong... freezes before it is empty???? Man I will have to take you on an ice fishing trip and show you how it is done without freezing your beer... :D

Plasma Joe
Post Reply

Return to “CNC Plasma Cutters General Forum”