diving at end of cut

[Minigunner1980]

hi guys I have a candcnc system with hyperthem powermax45 my torch head always seems to dive into the plate at the end of the cut is seems much more pronounced on thicker plate 3/8 im using mach3 and sheetcam any help would be great

thanks in advance

[tcaudle]

Not enough info to help. Needs some model numbers and DTHC version You can get concise help on their support forum

[WyoGreen]

As Tom mentions, if you go to the CandCNC forum, a search will find many answers to this question. I assume you are using SheetCam for your post processing, and I think you will probably need to make a Path Rule for the End of Cut that turns off your DTHC.

Steve