Video of my Arclight 9600 working

[little blue choo]

I know this will be boring for most of you but it is a big accomplishment for me. I have it cutting great with very little dross. A couple of months ago I knew nothing about a CNC plasma table and now I'm designing and cutting my own projects, simple things now but I will grow with the help of this forum and all the great people here. I learn a lot by just keeping my mouth shut and reading.
Thanks again
Rick
https://www.youtube.com/watch?v=Tu808e9CI1k

[whiskeymike]

Nice work. 16 gauge? Looks pretty quick and clean for the most part.

[little blue choo]

Yes Mike it's 16 gauge, using 45 amp fine cut tips using 40 amps and it cuts clean

[steel 35]

Thanks for posting and now I dislike the pause between cut's mine makes even more and know it can be fixed.

[exapprentice]

Hi Steel 32, apolagies to "little blue choo for hijacking!

Steel 32, be careful of what you wish for, I have slowed my machine right down
I had an issue wher it / me was trying to go to fast and things, some stupid things were happening.
Thanks to Tom at CandCNC I detuned my settings as per his recomendations and my machine now cuts everything.
No more messed up sheets no more messing about trying to get pieces finished after a (you know what)
maybe slower but it does get the job done and as it should be, even started getting better quality cuts
If you want have a look at
https://www.youtube.com/channel/UCrkDU2 ... BNQ/videos
and you can see what I mean

best regards to all
exapprentice

[tcaudle]

Thanks for posting and now I dislike the pause between cut's mine makes even more and know it can be fixed.

Yep, sure can!

[steel 35]

Thanks for posting and now I dislike the pause between cut's mine makes even more and know it can be fixed.

Yep, sure can!

My machine sitting still with the air / air compressor making noise and nothing else happening even for part of a second it stands my hair up!
When I get a rotary issue figured out with Luke I will follow up with this one. Thanks

[tcaudle]

send him your MACH XML Profile that works and the one that does not. We can run it here and figure out which setting is causing the torch fire issue

[drossmaker]

little blue choo,

We really like the video. Your machine looks great. Smoooth operator!

-drossmaker

[little blue choo]

Thanks Drossmaker. I started with a GREAT machine and some of the best hands on training anyone could have. I've had my machine up and running about 4 months and thanks to Arclights training videos and the good people on this forum I'm beginning to feel comfortable with it. Due to by other business's I get very little time to play but when I do it's heaven.